Single Axle 1" Radius Fenders
Tandem Straight, 1" Radius Fenders
Tandem Teardrop, 1" Radius Fenders
|
Fender Backs
Drop-Down Windows
Ventilators |
| Single Axle 1" Radius Fenders |
|
|
| Part No. |
Width |
Length |
Height |
Radius Type |
Material |
Tire |
| F55X1925-1R |
5.50" |
19.25" |
6.00" |
1", 90° Back |
16GA |
8" |
| F7X28-1RBS |
7.00" |
28.00" |
9.75" |
1", Both sides |
16GA |
13", 14" |
| F775X28-1R |
7.75" |
28.00" |
9.75" |
1", 90° Back |
16GA |
13", 14" |
| F9X32-1R |
9.00" |
32.00" |
15.25" |
1", 90° Back |
16GA |
14", 15" |
| F9X32-1RTP |
9.00" |
32.00" |
15.25" |
1", 90° Back |
14GA
Tread Plate |
14", 15" |
| FSB759X30-1R-RH |
7.5" Top, 9" Bottom |
30.00" |
15.00" |
1", 90°
Slant Plate |
16GA |
14" |
| FSB759X30-1R-LH |
7.5" Top, 9" Bottom |
30.00" |
15.00" |
1", 90°
Slant Plate |
16GA |
14" |
| F1075X32-1R |
10.75" |
32.00" |
15.25" |
1", 90° Back |
16GA |
14", 15" |
| F1075X36-1R |
10.75" |
36.00" |
20.25" |
1", 90° Back |
16GA |
15", 16" |
| F13X36-1R |
13.00" |
36.00" |
20.00" |
1", 90° Back |
16GA |
16", 16.5" |
|
| |
|
| Tandem Straight, 1" Radius Fenders |
|
| |
| Part No. |
Width |
Length |
Height |
Radius Type |
Material |
Tire |
| FTS9X72-1R |
9.00" |
72" |
20.5" |
1", 90° Back |
16GA |
15", 16" |
| FTS9X72-1RWB |
9.00" |
72" |
20.5" |
1", 90° Back |
16GA |
Fender Back installed |
| FTS9X72-1RTP |
9.00" |
72" |
20.5" |
1", 90° Back |
14GA
Tread Plate |
15", 16" |
| FTS1075X72-1R |
10.75" |
72" |
20.5" |
1", 90° Back |
16GA |
15", 16" |
|
| |
|
| Tandem Teardrop, 1" Radius |
|
|
| Part No. |
Width |
Length |
Height |
Radius Type |
Material |
Tire |
| FTD9X66-1R |
9.00" |
66" |
19" |
1", 90° Back |
16GA |
14", 15" |
| FTD9X72-1R |
9.00" |
72" |
20.5" |
1", 90° Back |
16GA |
15", 16" |
| FTD9X72-1RWB |
9.00" |
72" |
20.5" |
1", 90° Back |
16GA |
Fender back installed |
| FTD9X72-1RTP |
9.00" |
72" |
20.5" |
1", 90° Back |
14GA
Tread Plate |
15", 16" |
| FTD9X72-1RA |
9.00" |
72" |
20.5" |
1", 90° Back |
.090 Alum |
15", 16" |
| FTD1075X72-1R |
10.75" |
72" |
20.5" |
1", 90° Back |
16GA |
15", 16" |
| FTD1075X72-1RWB |
10.75" |
72" |
20.5" |
1", 90° Back |
16GA |
Fender back installed |
| FTD1075X72-1RTP |
10.75" |
72" |
20.5" |
1", 90° Back |
14GA
Tread Plate |
15", 16" |
| FTD1075X72-1RA |
10.75" |
72" |
20.5" |
1", 90° Back |
.090 Alum |
15", 16" |
| FTD13X72-1R |
13.00" |
72" |
20.5" |
1", 90° Back |
16GA |
15", 16" |
|
| |
|
| Fender Backs |
|
Used for additional strength. Fender backs are available in widths of 10"-12" with or without pre-cut radius to fit inside fenders, made of 16-18 GA material (. 48" - .057" thick), 14 GA treadplate also available for tandem fenders.
|
| Part No. |
Description |
Width |
Length |
| 10FB |
Rectangular sheet |
10 |
69.00 |
| 10FB-32R |
Pre-cut radius, fits #F9X32-1R fenders |
10.5 |
29.75 |
| 12FB-32R |
Pre-cut radius, fits #F9X32-1R fenders |
12 |
28.75 |
| 12FB |
Rectangular sheet |
12 |
69.00 |
| 12FB-72R |
Pre-cut radius, fits #FTS9X72-1R, FTD9X72-1R, FTS1075X72-1R, FTD1075X72-1R fenders |
12 |
69.00 |
| 12FB-72RTP |
Pre-cut radius, fits #FTS9X72-1RTP, FTD9X72-1RPT, FTD1075X72-1RTP fenders |
12 |
69.00 |
| J101972-FB |
Pre-cut radius, fits #J10972-TP fenders |
12 |
69.00 |
|
| |
|
| Drop-Down Windows |
|
Drop-down windows serve as "feed door" and window combined! Top-latch handle opens from outside, hinged at bottom. "T-slider" style lower glass panel allows screened ventilation with window in upright position. (Add 1/4" to window size for rough opening dimension.)
|
| Part No. |
Description |
| SG2024DD |
20" x 24", fits left or right side |
| SG2030DD |
20" x 30 ", fits left or right side |
| SG2430DD |
24" x 30 ", fits left or right side |
| **NB - Grates are an option and do not come with the windows. Glass damage is not covered by carriers/shippers. |
|
| |
|
| Ventilators |
|
| Butterfly ventilator: A full 7 1/2" in diameter, the polished aluminum butterfly ventilator is an attractive and useful source of ventilation. For horse, stock, dog or various other types of trailers |
|
| Sloped ventilator: Two-piece ventilator comes with: roof mount sloped roof vent, gasket & interior butterfly vent. |
Sorry Picture Not Available |
| Dome ventilator: Dome Crank-out vents with screen and inside trim can double as a vend and skylight. Available with a variety of options, all vents come with inner trim garnish. |
Sorry Picture Not Available |
| Pop-up ventilators: Offers simple lever operation, a wide flange for installation and a large opening for maximum air flow. the screen prevents objects from entering trailer. Inner trim garnish available. |
|
| Part No. |
Description |
Type |
| 775 |
Round polished aluminum vent, 7 1/2" diameter |
Butterfly |
| 9139 |
Sloped metal roof vent 10" x 12", with vent and gasket |
Sloped |
| M1659 |
14" x 4" Dome vent w/white acrylic top |
Dome |
| M1659-12V |
14" x 4" Dome vent w/white acrylic top & 12 volt fan |
Dome |
| M1660 |
14" x 4" Dome vent w/galv metal top |
Dome |
| V554 |
Rep'l 14" x 4" white acrylic top for M1659, M1659-12V |
Dome |
| V2047 |
22" x 22" escape hatch dome vent w/white acrylic top |
Dome |
| 9106 |
Two-way pop-up ventilator with screen, 8" x 12" and mounting gasket |
Pop-up |
| 9106AL |
Two-way aluminum pop-up ventilator with screen, 8" x 12" and mounting gasket |
Pop-up |
| 2756 |
Inner trim garnish for 9106, 9106Al black plastic, 2 1/4" tall (can easily be cut to fit proper depth of ceiling) |
Pop-up |
| 9106GKT |
Replacement gasket for 91-6 series vents |
Pop-up |
|
Search Trailer Canada's Website
|
|
