|
|
Retractable (Hidden) Ball Mount
DSP Sliding Gooseneck Hitch
B&W Turnover Gooseneck Hitch
Binkly Mini 5th Wheel
DSP Super 5th Wheel Dual Position
DSP Super 5th Wheel "Easy-Level" Self Adjusting
|
DSP Bolt On Hitch Receivers
DSP Weight Distribution Systems
Weld on Receiver Sleeves (Tubes)
|
| |
|
| Retractable Ball Mount |
|
| With this "hidden" ball mount, the 2 5/16" hitch ball folds flush with the base plate when not in use to provide maximum utilization of the truck bed. |
|
| Part No. |
Ref No. |
Description |
| B25 |
314602 |
Retractable ball mount, 25,000lb G.V.W., 6,000lb tongue capacity. |
|
| |
|
| DSP Sliding Gooseneck Hitch |
|
| Unlike a folding ball, a large hole does not need to be cut into the truck bed, just 8 - 1/2" holes need to be drilled. All around solid construction, bolted directly to the frame with Grade 5 carriage bolts and 8 - 3/8" thick frame brackets. Please contact us at 1-888-645-6998 (within Canada) in order to find specific rail kit for your vehicle (sold separate). Outside of Canada call 1-780-645-6998. |
|
| Part No. |
Ref No. |
Width |
Ver. Load |
G.T.W. |
| 72924 |
72924 |
24" |
6,500lbs (2,954kg) |
26,000lbs (11,818kg) |
| 72935 |
72935 |
35" |
6,500lbs (2,954kg) |
26,000lbs (11,818kg) |
|
| |
|
| B&W Turnover Gooseneck Hitch |
|
| The B&W Turnover Ball System converts from a towing unit to a level bed in less than 30 seconds. Another much appreciated benefit is the ease of installation. The hitch bolts directly to the frame under the bed using the existing holes already there. Parts listed below ending in "R" include mounting rails. Capacity rated at 30,000lbs, tongue weight of 7,500 lbs. |
|
| Part No. |
Ref No. |
Description |
| BW1199R |
314630 |
For 99-2001 Ford F250/F350 Superduty |
| BW1394R |
314632 |
For 94-2001 Dodge 1/2, 3/4, 1 ton pickup |
| BW1061R |
314633 |
For 2001 Chev 3/4 ton heavy duty |
| BW1059R |
314634 |
For 99-2001 Chev 1/2 ton Silverado |
| BW1000R |
314636 |
For 88-99 Chev 1/2, 3/4, 1 ton Long Bed |
| BW1050R |
314638 |
For 88-99 Chev Short Bed Pickup |
| BW1062R |
314639 |
For 2001 Chev 1 Ton HD |
| BW1100R |
314640 |
For 80-99 Ford 3/4 Ton w/o overload springs |
| BW1110R |
314642 |
For 80-99 Ford 3/4, 1 Ton w/overload springs |
| BW1150R |
314644 |
For 80-96 Ford 1/2 Ton Pickups |
| BW1197R |
314646 |
For 97-2000 Ford 1/2, 3/4 Ton Light Duty Body |
| BW1303R |
314657 |
2003 Dodge 3/4 & 1 Ton |
|
| |
|
| Binkly Mini 5th Wheel |
|
| For R.V., utility or industrial trailers. Accepts standard 2" SAE king pins. Double pivot FW0002-45 permits 10 degree side-to-side pivoting. |
|
| Part No. |
Ref No. |
Description |
| FW0001 |
296200 |
Binkley 32,000 lb 12" diameter 5th Wheel |
| FW0002-45 |
296400 |
Binkley 32,000 lb 12" diameter 5th wheel, double pivot |
|
| |
|
| DSP Super 5th Wheel Dual Position |
|
| The DSP Dual Position "Original" Super Fifth Wheel Hitch (DPO). A must for the increasingly popular short box trucks. Complete's include crossbars (with H brackets and side brackets), rails and mounting hardware. Comes in 3 boxes. Rails are vehicle specific. Call 1-888-645-6998 within Canada when ordering to ensure you receive the correct rail kit. Outside of Canada call 1-780-645-6998. |
|
| Part No. |
Ref No. |
Width |
Ver. Load |
G.T.W. |
| 72591 |
72591 |
24" |
4,250lbs (1,932kg) |
17,000lbs (7,728kg) |
| 72587 |
72587 |
35" |
4,250lbs (1,932kg) |
17,000lbs (7,728kg) |
| 72592 |
72592 |
35" |
5,000lbs (2,273kg) |
20,000lbs (9,091kg) |
| Upper Half (rail not included) 24" 17K #72944 s |
| Upper Half (rail not included) 35" 17K #72995 |
| Upper Half (rail not included) 35" 20K #72998 |
|
| |
|
| DSP Super 5th Wheel "Easy-Level" Self Adjusting |
|
| Spring loaded cradle on the "H" bracket is self adjusting. Made to deal with the difficulties associated with the engaging and disengaging to the trailer on unlevel ground. The springs compensate for any small or large angles created by unlevel ground. Complete's include crossbars (with H brackets and side brackets), rails and mounting hardware. Comes in 3 boxes. Rails are vehicle specific. Call 1-888-645-6998 within Canada when ordering to ensure you receive the correct rail kit. Outside of Canada call 1-780-645-6998. |
|
| Part No. |
Ref No. |
Width |
Ver. Load |
G.T.W. |
| 72601 |
72601 |
24" |
4,250lbs (1,932kg) |
17,000lbs (7,728kg) |
| 72602 |
72602 |
35" |
4,250lbs (1,932kg) |
17,000lbs (7,728kg) |
| 72603 |
72603 |
35" |
5,000lbs (2,273kg) |
20,000lbs (9,091kg) |
| Upper Half (rail not included) 24" 17K #72996 |
| Upper Half (rail not included) 35" 17K #72997 |
| Upper Half (rail not included) 35" 20K #72999 |
|
| |
|
| DSP Bolt on Hitch Receivers |
|
DSP currently manufactures over 50 Bolt on Hitch Receivers.
- Class II: Built for smaller towing vehicles, towing light trailers or bicycle racks. WARNING: Class II receivers are not intended to be used with weight distribution systems.
- Class III: Built for mid and full size vehicles, towing heavier loads using Weight Distribution Systems.
- Class III Contoured: Same application as the regular Class III receivers with an extra attractive style.
- Class IV: Built for heavier trailers, for towing vehicles with heavier load towing capability.
Bolt on Hitch Receivers are vehicle specific. Call 1-888-645-6998 within Canada when ordering to ensure you receive the correct kit. Outside of Canada call 1-780-645-6998. |
|
Class II Receiver Hitch |
|
| Series |
Receiver |
G.T.W. |
T.W. |
Ballmount |
| 53000 |
1 1/4" x 1 1/4" |
3,500lb (1,590kg) |
350lbs (159kg) |
1 1/4" x 1 1/4" included |
| 54000 |
2" x 2" |
3,500lbs(1,590kg) |
350lbs (159kg) |
not included |
|
| |
|
Class III and IV Receiver Hitch; 2" x 2" |
|
| Series |
Weight Distribution System (WD)* |
Weight Carrying with Ballmount |
| G.T.W. |
T.W. |
G.T.W. |
T.W. |
| 55000 |
5,000lbs (2,272kg) |
500lbs (227kg) |
3,500lbs (1,590kg) |
350lbs (159kg) |
| 56000 |
8,000lbs (3,636kg) |
800lbs (363kg) |
5,000lbs (2,272kg) |
500lbs (227kg) |
| 57000 |
10,000lbs (4,545kg) |
1000lbs (454kg) |
6,000lbs (2,727kg) |
600lbs (227kg) |
| 58000 |
12,000lbs (5,454kg) |
1,200lbs (545kg) |
8,000lbs (3,636kg) |
800lbs (363kg) |
*WARNING: To achieve the higher rating, a Weight Distribution System must be used at all times. |
| |
|
Class III Contoured Receiver Hitch; 2" x 2" |
|
| Series |
Weight Distribution System (WD)* |
Weight Carrying with Ballmount |
| G.T.W. |
T.W. |
G.T.W. |
T.W. |
| 55900 |
5,000lbs (2,272kg) |
500lbs (227kg) |
3,500lbs (1,590kg) |
350lbs (159kg) |
| 56900 |
8,000lbs (3,636kg) |
800lbs (363kg) |
5,000lbs (2,272kg) |
500lbs (227kg) |
*WARNING: To achieve the higher rating, a Weight Distribution System must be used at all times. |
| |
|
| DSP Weight Distribution Systems |
|
| Once assembles, no tools are required to connect or disconnect. Distributes weight to all trailer and towing vehicle axles. Increases steering capability, brake control and towing safety. Reduces sway from traffic and sudden crosswinds. All systems must be used with a Bolt On Hitch Receiver rated for the same T.W. & G.T.W. No left & right Torsion bars, both are interchangeable. Torsion bars must always be used to achieve T.W. & G.T.W. Comes with integrated sway control bracket. Access hole for large sockets for easier fastening of Hitchball nut. 6 hole shank included, for greater drop of rise. |
Bolt On Adjustable Weight Distribution System
(with Sway Control Bracket)
 |
| Part No. |
Ref No. |
T.W. |
G.T.W. |
| 41553 |
41553 |
350lbs |
3,500lbs |
| 41554 |
41554 |
550lbs |
5,500lbs |
| 41555 |
41555 |
750lbs |
7,500lbs |
| 41556 |
41556 |
1,000lbs |
10,000lbs |
| 41557 |
41557 |
1,200lbs |
12,000lbs |
|
| |
|
| Weld On Receiver Sleeve (Tube) |
|
|
| Part No. |
Ref No. |
Length (A) |
Receiver Size |
| 43301 |
43301 |
10" |
2" x 2" |
| 43302 |
43302 |
36" |
2" x 2" |
| 43303 |
43303 |
48" |
2" x 2" |
| 43304 |
43304 |
24" |
2" x 2" |
| 43305 |
43305 |
6.5" |
2" x 2" |
Search Trailer Canada's Website
|
|
|
|
